Green HDPE Sheet High Density Polyethylene Plastic Sheet Manufacture
HDPE, the full name is high density polyethylene. The higher density improves its tensile strength ,surface hardness and heat deflection temperature. It is widely used because of its good impact resistance, nice chemical resistance, low water absorption and good resistance to UV.
Craft
Craft :Mould pressing or Extrusion
Material:100%vrigin material or recycled material
Note :Any shape and size could be made by CNC engraving machine according to drawing.
Characteristics
- wear resistance, strong anti sliding friction.
- impact toughness.
- Strong corrosion resistance.
- Self-lubrication.
- Non-toxic. UHMW is non-toxic and harmless
- Low temperature resistance and anti aging.
- Surface non adhesion, non fouling.
- Excellent crack resistance.
Images
Applications
Recyclable HDPE construction formwork board
Wear resisting and chemical resisting liner sheet
Anti-UV sheet for children playground
Colored sheet for advertising and caution board:
FDA standard HDPE board as cutting board :
HDPE board as ice rink floor
Hockey rink ,ice rink barrier by HDPE sheet
HDPE board for making furnture.
HDPE sheet for printing .
Technical Data Sheet
PROPERTIES |
Test Method |
Unit |
Value |
I.Physical Properties |
Density |
ISO 1183 |
g/cm3 |
0.95~0.96 |
Water absorption 24hrs |
ISO 62 |
% |
0.01 |
II.Thermal Properties |
Heat deflection temperature - HDT/A |
ISO 75-2 |
ºC |
55 |
Min. service temperature |
|
ºC |
-30 |
Max. service temperature-Long Term |
|
ºC |
90 |
Thermal conductivity at 23 ºC |
DIN 11359 |
W/(K*m) |
0.42 |
Coefficient of linear thermal expansion |
ISO 11359 |
10-4*K-1 |
1.5 |
Flammability Rating(6mm thickness) |
UL 94 |
- |
HB |
III.Mechanical Properties at 23ºC |
Tensile strength at yield |
ISO 527-2 |
MPa |
27 |
Tensile strength at break |
ISO 527-2 |
Mpa |
35 |
Elongation at break |
ISO 527-2 |
% |
700 |
Modulus of elasticity after tensile test |
ISO 527-2 |
MPa |
1,000 |
Modulus of elasticity after flexural test |
ISO 178 |
MPa |
1,000 |
Hardness - Shore D |
DIN 53505 |
|
64 |
Charpy impact strength |
ISO 179 |
kJ/m2 |
N. B. |
Friction coefficient |
DIN 53375 |
|
0.3 |
IV.Electrical Properties at 23ºC |
Dielectric constant at 1 MHz |
IEC 60250 |
106Hz |
2.3 |
Dielectric loss factor at 1 MHz |
IEC 60250 |
106Hz |
3.1 |
Volume resistively |
IEC 60093 |
Ohm (Ω) * cm |
>1016 |
Surface resisively |
IEC 60093 |
Ohm (Ω) |
>1015 |
Dielectric strength |
IEC 60243-1 |
kV/mm |
17 |
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m |