Material: | Acetal |
---|---|
Kind: | POM |
Water Absorption: | 0.1%~0.3% |
Contraction Percentage: | 2.0%~5.0% |
Tensile Strength: | 41~50MPa |
Diameter: | 6mm to 200mm |
Customization: |
---|
Suppliers with verified business licenses
10-200mm Polyoxymethylene POM Rods
Acetals's resistance to creep is excellent. Moisture, lubricants and solvents including gasoline and gasohol have little effect on this property, which is important in parts incorporating self-threading screws or interference fits. Good electrical properties qualify these materials for electrical applications requiring long-term stability. Acetal copolymers retain much of their toughness through a broad temperature range and are among the most creepresistant of the crystalline thermoplastics. A low moistureabsorption characteristic permits molded parts to serve reliably in environments involving humidity variations.
Density | 1.4-1.5g/cm3 |
Melting point | 175centigrade |
Tensile strength | 50Mpa |
Elongation | 60% |
Impact strength | With notch 7.6 KJ/m2 |
Without notch 108KJ/m2 | |
Water absorption | 0.2% |
Working temperature | -50 to 110centigrade |
Hardness(N/mm2) | 270-280 |
Bending modulus | 2.3-3Mpa |
Organic solvents | Good |
Suppliers with verified business licenses