UHMWPE Plastic Synthetic Ice Skating Rink
Plastic ice rinks are manufactured from 100% UHMW PE which will not warp, crack, splinter or corrode. It has become a popular choice for skating boards, hockey playground and many other facilities. Our UHMW PE ice rinks have lots of advantages over real ice.
Images
1. Good skating experience like on real ice
Super smooth surface makes good skating experience like natural ice
2. Easy installation
Easy assembly/disassembly due to the puzzle system that guarantees a flat and level surface of the rink.
3. Cost effective
Low operating and maintenance cost
4.For any type of skates
No special ice skates are required, it can be used with traditional ice skates
5. Any weather any place
The system can be used in any place and in any weather condition.
6. Extensive application
Public ice-skating, hockey schools, sport facilities, etc.
7. Free Play
The same movements, jumps and tricks can be implemented as on real ice
8.Long life span
The lifespan is significantly longer than that of the traditional plastic ice-rinks
9.Any size can be customized
| Comparison |
Conventional Ice |
Prior Plastic |
| Purpose |
Skating |
Multi-purpose |
| Building |
Special sealed building |
No special needs |
| Floor |
Concrete or sand |
Any solid surface |
| Power Plant |
2 compressors, etc |
None |
| Technicians |
1-2 |
None |
| Annual Maintenance |
Expensive& mandatory |
Minimal |
| Maintenance |
Frequent during a day |
Minimal |
| Special equipment |
Zamboni, driver& costs |
Commercial scrubber& vacuum cleaner |
| Water consumption |
2600 gallons/day |
None |
Characteristics
wear resistance, strong anti sliding friction.
impact toughness.
Strong corrosion resistance.
Self-lubrication.
Non-toxic. UHMW is non-toxic and harmless
Low temperature resistance and anti aging.
Surface non adhesion, non fouling.
Excellent crack resistance.
Properties for UHMWPE Sheet
| PROPERTIES |
Test Method |
Unit |
Value |
| I.Physical Properties |
| Density |
ISO 1183 |
g/cm3 |
0.96 |
| Water absorption 24hrs |
ISO 62 |
% |
0.01 |
| II.Thermal Properties |
| Heat deflection temperature - HDT/A |
ISO 75-2 |
ºC |
42 |
| Min. service temperature |
|
ºC |
-269 |
| Max. service temperature-Long Term |
|
ºC |
90 |
| Thermal conductivity at 23 ºC |
DIN 11359 |
W/(K*m) |
0.42 |
| Coefficient of linear thermal expansion |
ISO 11359 |
10-4*K-1 |
2 |
| Flammability Rating(6mm thickness) |
UL 94 |
- |
HB |
| III.Mechanical Properties at 23ºC |
| Tensile strength at yield |
ISO 527-2 |
MPa |
17 |
| Tensile strength at break |
ISO 527-2 |
Mpa |
40 |
| Elongation at break |
ISO 527-2 |
% |
>50 |
| Modulus of elasticity after tensile test |
ISO 527-2 |
MPa |
650 |
| Modulus of elasticity after flexural test |
ISO 178 |
MPa |
800 |
| Hardness - Shore D |
DIN 53505 |
|
61 |
| Charpy impact strength |
ISO 179 |
kJ/m2 |
N. B. |
| Friction coefficient |
DIN 53375 |
|
0.25 |
| IV.Electrical Properties at 23ºC |
| Dielectric constant at 1 MHz |
IEC 60250 |
106Hz |
3.1 |
| Dielectric loss factor at 1 MHz |
IEC 60250 |
106Hz |
0.0001 |
| Volume resistively |
IEC 60093 |
Ohm (Ω) * cm |
>1014 |
| Surface resisively |
IEC 60093 |
Ohm (Ω) |
>1011 |
| Dielectric strength |
IEC 60243-1 |
kV/mm |
45 |
|
Company started production of nylon rods, plates, and Teflon rods, plates, products. The nylon material is light weight, corrosion resistance and other properties it determines increasingly widely used in chemical industry, machine building, research and other sectors have played a role in the replacement of copper and metals. Fluoroplastics PTFE which is an important species in the C-F bond PTFE can be particularly high stability. Apart from alkali metals and elemental fluorine, it will not be any chemical erosion. The company is a manufacturer of products, including PTFE bar, sheet, pipe, profile, chemical pipelines, seal ring, no lubricating mechanical parts. Widely used in electronic and electrical appliances industry, the chemical industry, machinery and other industries.
Over the years the company for the quality of products, excellent service won praise from all parts of the user and the United States, Mexico, South Korea and some other foreign customers of all ages. After the company will continue efforts to make the company's products more effective and a band.
Integrity-based business ideas: Operating purposes: Quality first, service first, the price is moderate We pay more attention to quality and service!
){kind=link}